Power source: Rechargeable Lithium battery, 3.7V/ 2200mAh. Charger: Power Input: 100V to 240V. The device is not provided sterile and is not intended to be sterilized when used. Press the S button, following four modes are available: Normal Mode: screen show P1. Press the S button to select of time which could be 5, 10, 15, 20 seconds.
Pulse Mode: screen show P2. Strong Mode: screen shows P3. Press the S button to select of time which could be 1.During the operation, aim the top of the main unit, at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound. The curing light radiates blue light and starts working according to the set modes mean while. During operation, the blue light can be stopped by press the power button at any time. After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times. Low power detective circuit is fixed inside of the main unit when low power is detected, the display screen of main unit will wink, please charge in time. This equipment will turn off automatically if there is no any action within 2 minutes; You can turn it on by press any button. The depth of solidification of composite is no less than 4mm per 10 second. If you are planning on combining your items, please make sure that you wait until ALL auctions have ended before you visit the checkout. All items must be paid within 7 days. You feedback is VERY important to us!
We understand the concerns and frustrations you might have, and will try our best to resolve the isuues. Exchanges are offered for items that are defective or damaged when received, although this is highly unlikely.Defective items or problems with your order must be reported within 3 days after receiving. Please keep all packaging, documentation, packing list, etc. That came with your order. These will be used to verify claims if there is any problem with you.
Serivce is our #1 priority at Dentistclub! We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. We stand behind our products and pride ourselves on OUTSTANDING customer service. The sale of this item may be subject to regulation by the U.Food and Drug Administration and state and local regulatory agencies. Trade/Device Name: LED Curing Light. Regulation Number: 21 CFR 872.6070. Regulation Name: Ultraviolet Activator for Polymerization. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Handpieces & Instruments\Dental Curing Lights". The seller is "dentistclub" and is located in this country: CN. This item can be shipped worldwide.